buy online | FPV-OSD-Camera Mounts | FPV Equipment
Who needs goggles when you have 12inches…………of FPV monitor! This is the ultimate for those who prefer a screen over goggles. The New FieldView 1212 is not just some random off the shelf monitor, it has been optimized for FPV use with features such as a non-blue screen if the input signal gets weak, a wide range of input voltages, an integrated 2 axis tripod mount and of course a removable sun shield for those sunny days. FieldView monitors have set a high standard in the FPV community and the new 1212 is no exemption.Specifications:• Image: 12.1" TFT LCD LED• Resolution: 800x600• Input resolution up to 1920x1440• Horizontal frequency range: 30-60KHz• Field frequency range: 60-75Hz• Pixel Size: 0.2175(H)x0.2175(V)m• Display Ratio: 4:3• Brightness: 330cd/m²• Viewing Angle: 70°/70°(L/R) 50°/70°U/D• Contrast Ratio: 900:1• Response time: 30ms• Input Voltage: DC6-24V• Power Consumption: 8W• Input Signal: VGA,AV1,AV2,Audio,DVI,HDMI• NTSC/PAL Manually Selectable in Menu• Working Temperature: -10~50c• Storage Temperature: -20~60c• Size: 298L×245W×45Dmm• Weight: 1130g without cables or sun shield, 1330g with cables and sun shield• Mounting: Standard 1/4-20 tripod and VESA mountsIncludes:12.1" LCD MonitorSun Shield with Velcro Strips12V 1200mA power supply with US prongs, accepts 100-240V, 50/60HzA/V Cable with 1 Composite Input, 1 Audio Input (mono), 1 Power input (2.1mm barrel)Manual Will Fit on Tripod with rear mount click here
The Fieldview 888 monitor is the perfect partner for FPV users or any other form of videography. It is great for outdoors as it has a very bright image and LED backlit screen which is fully adjustable and the monitor is supplied with its own foldable screen shroud for optimal viewing.One of the most important features of this monitor for FPV users is that if the signal gets weak it does not switch to the "blue screen". This allows you to fly much further without losing the image, when there is no video input the monitor just shows static, it never turns blue.Features:• 8.0 inch HD Display with 450cd/m Brightness• Ideal for use with FPV• No "Blue Screen" due to weak signal input• 800 x 480 Resolution Display• LED Backlight• 16:9 Display Ratio• 500:1 Contrast Ratio• Supports video formats: NTSC M, PAL M, NTSC BG, PAL N,NTSC DK, PAL DK, PAL 1, SECAM BG• Anti-Glare Surface Treatment • Foldable Screen Shroud for outdoor useSpecifications:Dimensions: 208 x 145 x 33mmBrightness: 450cd/m²Resolution: 800 x 480 pixelsDisplay Ratio: 16:9Backlight: LEDViewing Angle: 70°/ 70° (L/R) 50°/ 70° (U/D)Input Voltage: DC 6 ~ 18VInput Signal: Video, AudioPower Consumption: 6WWorking Temperature: -20°C ~ 60°CStorage Temperature: -30°C ~ 70°CWeight: 520gInstallation: 1/4"- 20 thread and VESA mounting socket (75mm)Speaker: Built in, 1 WattCertificate: CE, FCC, RohsIncluded in box:8.0 inch HD MonitorOutdoor Screen ShroudDC 12V Power SupplyUser manual Alternative-image click here
This 5.8GHz Diversity LCD Screen offers the perfect solution for any 5.8GHz FPV system. It features its own in-built 2CH 5.8GHz A/V receiver, allowing it to receive directly from your FPV model's A/V transmitter! This means it can eliminate the need for expensive FPV goggles, or can be used simply as a way to display your FPV model's video for others to view as you fly. Featuring dual A/V outputs, this monitor is capable of outputting the signal of both RF channels at the same time. It also features an A/V input as well as a Tracker Link port.Offering true 5.8GHz diversity, this device features automatic antenna switching to provide the best reception possible. A foldable screen shroud is included to optimize viewing in bright conditions.Features: • 800 x 480 High Resolution TFT LCD Screen• In-built 5.8GHz Dual Switching Receiver• Dual Buffered A/V Outputs• Capable of Receiving 2 Different Channels Simultaneously • Not Affected by 2.4GHz R/C Transmitter Signals• Lightweight and Durable• 9 Language Menu SelectionWorking Frequencies:CH1: 5705MHzCH2: 5685MHzCH3: 5665MHzCH4: 5645MHzCH5: 5885MHzCH6: 5905MHzCH7: 5925MHzCH8: 5945MHzSpecs:Screen Size: 7.0 inchScreen Type: TFT LCDBacklight Type: LEDResolution: 800 x 480Brightness: 450cd/m²Contrast: 500:1View Angle: 140/120° (Horizontal/Vertical)Working Voltage: DC 7~12V or 11.1V lipoly batteryWorking Temperature: -10°C ~ +65°CPower Consumption: < 8WSize: 180 x 120 x 23mmAntenna connection: SMAIncluded in box:7.0 inch 5.8GHz Diversity TFT LCD monitorOutdoor screen shroudJST power plug adapter lead A/V cables More...images click here
The Boscam RC800 DVR 7 inch FPV monitor is truly an all in one FPV monitor. The RC800 has a built in high sensitivity 32ch 5.8GHz receiver and integrated DVR to record your epic fpv flying.The RC800 also has a built in OSD that displays the channel unlike other monitors that are dip switch settable. The built in OSD also displays battery voltage, record time and memory usage, along with other useful information.Boscam’s RC800 has an integrated AAT port for antenna tracking systems and a data out that allows for synchronized channel switching in flight with your RC transmitter. The built in DVR records to a standard SD card in MP4 format for maximum compatibility in pristine original quality.The RC800 With one of the brightest non-glare and non-blue screen screens on the market, built in audio, 32channel receiver, DVR, and AAT/data outputs…makes this hands down the best value in FPV monitors.Features:• Built in DVR• Built in 32 channel 5.8GHz high sensitivity receiver• Loop Record• Date and time Stamp• OSD with Memory Info, Format, voltage etc.• Multi language support: English, Chinese, German, French• TV PAL/NTSC Standards• Auto Power Off• Low voltage warning with Battery Type and cell count support• 5 levels of LCD Brightness• Supports 16:9 and 4:3 Screen sizes• AAT output for antenna tracking systems• Data out for synchronized RC channel switchingSpecifications:Size: PAL(720×576)?NTSC(720×480)Formate:MP4, mono audio channelStorage: SD Card (support 32GB in max)Wireless receiver:5.8GHz 32CH sensitivity -90dBmLCD: 7 inch 800x480 HD ScreenAV output: mono audio channel, video outputAV input: mono audio channel, video inputDC IN: 7-28VAAT: OUT portANT: RPSMADATA: OUT portUSB: USB2.0Includes:7 inch Monitor x1Light Shield x1USB Cable x1AV Cable x1DC Cable x1AAT Connection Cable x1Data Connection Cable x1 more detailed image of product
Boscam has forged a reputation of quality and reliability and has been tested and developed by FPV pilots for FPV pilots. The TS832 Transmitter packs a whopping 600mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The TS832 is transmitting a full range of 32 channels and uses an easy to use 2 button interface, it also comes with a clean pre-wired harness, and only weighs in at a scant 21g, it’s Perfect for a wide range of aircraft!The RC832 Receiver is nice and small in size for easy integration into your ground station, but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two independent AV outputs for both audio and video. So you can use a monitor and set of goggles or maybe a DVR to record your flight, for when your significant other asks where you were for the last 4 hours. Powering the receiver at the field is as easy as plugging in a 3 cell lipoly into the included prewired cable with mini JST. It just doesn’t get any simpler than this.*For best range and video link stability we recommend using the Boscam 5.8GHz Cloud Spirit circular-polarized Antenna Set (SMA-RP) available below in the accessory’s tabFeatures:• 32 channels: Cover A, B, E bands and F bands• Two switching buttons for the band and channel• Two digits display for the band and channel• Power off memory for last channel and band• dual Independent video and audio signal outputsSpecs:Video format supported: NTSC/PALAntenna connection: RP-SMA, jack (module side, both TX and RX)Transmitter TX TS832 specs:Power input: 7.4-16V (3S Lipoly suggested)Transmitting power: 600mWAntenna gain: 2dbmWorking current: 220mA at 12VVideo bandwidth: 8MhzAudio bandwidth : 6.5MhzWeight: 21gDimension: 54x 32x 10mm(excluding antenna)Receiver RX RC832 specs:Power input: 12VWorking current: 200mA maxAntenna impedance: 50OAntenna gain: 2dbRx sensitivity -90dBmVideo impedance: 75OVideo format: NTSC/PAL autoDimension: 80x 65 x15mmWeight: 85gFrequency range:FR1 5865,5845,5825,5805,5785,5765,5745,5725FR2 5733,5752,5771,5790,5809,5828,5847,5866FR3 5707,5685,5665,5645,5885,5905,5925,5945FR4 5740,5760,5780,5800,5820,5840,5860,5880 More details of the package images click here
The Quanum telemetry system gives real-time and accurate voltage, current, mAh and temperature display plus low voltage warnings via a robust 2.4Ghz DSSS connection.The receiver pannel is a large 132x64 LCD and attaches directly to your existing radios antenna for convenient at-a-glance in-flight status checks.The Quanum Telemetry system will also warn you when your battery pack is approaching 3.2v per cell with a variable audio tone. No more deadstick landings!And because its 2.4Ghz DSSS it wont interfere with your existing system, no matter what channel youre on!The Quanum Telemetry system transmits a narrow, lightweight signal 4 times a second and uses DSSS technology to ensure no conflicts with other systems close by. Included is an inbuilt 450mAh Li-ion power source and a convenient in-car and PC USB charge jack!Specification;Tx Weight: 16gTx Size: 50x17.5mmTx Output: 20dBm <100mW 2.4Ghz DSSSFCC ID: XR9V003 Included;Large high contrast 132x64 pixel LCD 2.4Ghz Receiver. (V2)1km Range 1~6S Transmitter (V2)Receiver mount (universal type)Cigarette lighter 5v out USB chargerUSB cable. (Charge in car or on a PC)CE, FCC, RoHSNote: Current/temp sensor sold separately. More...Information click here
Quanum 2.4Ghz voltage telemetry transmitter Current & Heat SensorSpec.Direct DC Only.Current Sensor: 100A MaxTemp Measurement: -20~80Deg CTo be used with Quanum transmitter V2 module. More Images of Quanum Cl;ick here
5.8Ghz 200mW transmitter. This system is Good for up to 500m flying with the supplied antenna. An optional directional antenna can extend range to 1km+. This unit a Includes built-in microphone. The receiver unit has additional AV outputs for video recording while using FPV goggles.Specifications:Output impedance: 50OhmOutput power: 21~23dBmChannels: 8 Transmitter operating voltage: 7~15VDC / 150mAReceiver operating voltage: 5VDCOperating temp: -10~85CVideo bandwidth: 0~8.0MHzAudio frequency: 6.5MHzVideo input level: 0.8~1.2Vp-pVideo input impedance: 75OhmAudio input level: 0.5~2.0Vp-pAudio input impedance: 10K/OhmWeight: 25gAntenna connector: RP-SMA Dimensions: 55x26x17mmChannels5.8G : 5705,5865,5665,5645,5885,5905,5925,5945MHZ Click to see cable set
The camera uses a quality glass lensed SONY CCD system. Included.1 x SONY CCD 1/3inch CameraCamera spec.CCD sensor type:1/3 color SONY CCD Pixel;NTSC: 510(H)*492(V) PAL: 500(H)*582(V) (Included)Scanning system: Interlaced scanningSynchronization: System:InterHorizontal resolution: 420TV line Minimum Illumination 0.01LUX/F1.2DSP+CCD: CXD3142R+405AK S/N Ratio: 48dB Gamma Modification: 0.45 White balance: AutoAuto backlight compensation: AutoLens: 3.6MMAudio: NoInput voltage: 9~12.6V Electric current 80MA Electronic Shutter: 1/50 (60) ~ 1/100,000s Video output: 1.0VP-P composite video Operation Temp.: -20~50Size: 38*38mm Flight time: Approx 60min/100mah 3S
2 x 9G Servos in pack ith Futaba / JR compatable plugsPlastic gears
eLoggerTM V4 - the Easiest Way to Monitor your Power System!New! Whether you’re into Electric Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The eLogger is the product you need to monitor your LiPo, A123 or any other electric power system.Here are the key features of the eLogger V4:Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to 80 voltsCurrent is measured with a true Hall Effects Sensor - NOT a power robbing resistance shuntAdjustable logging rate (from 50 samples per second to one sample every 5 minutes)16 times the logging space of the standard eLogger V3, and lossless data compression. Typically logs all available sensors for about four hours, at 10Hz.All data logged to permanent memory, which retains the data even when the power is removedFully compatible with our OSD Pro expanderIncludes Y cable for throttle position loggingGreat for bench monitoring of battery charging also!Supports the PowerPanel LCD DisplayAccepts optional inexpensive sensors for three Temperatures, RPM (brushless, magnetic or optical), Airspeed, Altitude, GPS, Servo Current, and moreSoftware computes Wattage, mAH, etc. for complete e-flight data.Fully Compatible with Windows 7 (32 and 64 bit), Vista, 98SE, ME, Win2K and XP™Weighs about 0.8 oz (22 grams). Versions with Wire Leads may weigh slightly more.Comes with our state of the art Windows virtual playback display and graphing softwarePowerful Graphing software has advanced charting features, such as amps vs voltsInternet Updatable firmware - as we add new features or (heaven forbid) have a firmware bug, the update is just a download away! No need to ship hardware back and forth.Full support for English and Metric units. Software has built in English, German and Chinese language. overview page click here
New GPS Expander Module based on the latest GPS technology. Built-in LED which indicates 3D fix. Fast 10Hz update rate. Built-in battery backup for quick fixes.Plugs into the eLogger V4 to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. Integrated display/3D graphing software included in data system. WAAS and EGNOS compatible, built-in patch antenna.NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) is required.
Great for checking Battery condition has light and alarm fitted This unit will give a warning buzzer when the Lipoly pack drops below 9v.
TURNIGY Multi-F DC Watt Meter 75AA geat way to measure your motor or battery performance! Use it to control your ESC while you measure total power usage. A great addition to any testing station!Spec.Input Range: 3.3 ~ 50vOutput: 0~70APulse Width: 20ms: .9-2.1ms(high side) / 1-2ms(low side)
